See Our Video
See the patented “Delta T Alert” sensor in action. This innovative device monitors the heartbeat of your facility: your electrical system.
View Video
Avoid Equipment Downtime...
Burned insulation on A/C Disconnect
Burned insulation on phase “A” of fused Disconnect
Burned insulation on A/C Disconnect
Burned insulation on phase “A” of fused Disconnect
...or Even Catastrophic Failure:
Burned Breaker in Main Switchgear Room
Burned 480 volt Fused Disconnect
Burned Breaker in Main Switchgear Room
Burned 480 volt Fused Disconnect
Welcome!
Avoid a major electrical failure—and potentially significant financial loss—with the “Delta T Alert”. This patented device, developed by Delta T Engineering, LLC, magnetically attaches to your electrical equipment covers, monitoring the Delta T (temperature differential) between the interior of an electrical enclosure and the ambient temperature of the room in which the enclosure is located.
You can configure the Delta T to collect data on a daily basis, at specific time intervals. The information may then be transmitted wirelessly to an onsite computer for analysis. Whether your panels are in a 100° switchgear room in Manhattan, a 20° warehouse in Alaska, or a 65° data center in Tuscaloosa, the Delta T Alert will warn you of excessive temperature rise within your electrical enclosures--well before more serious problems may occur.
Ensure the safety of your commercial building while staying on top of critical information. With one simple installation, the Delta T can spare you not only precious downtime but also expensive repairs.
Go beyond preventive maintenance with the Delta T Alert, the sensor that’s revolutionizing electrical systems monitoring. To find out more, click here--or contact us at 1-877-321-0576
You can configure the Delta T to collect data on a daily basis, at specific time intervals. The information may then be transmitted wirelessly to an onsite computer for analysis. Whether your panels are in a 100° switchgear room in Manhattan, a 20° warehouse in Alaska, or a 65° data center in Tuscaloosa, the Delta T Alert will warn you of excessive temperature rise within your electrical enclosures--well before more serious problems may occur.
Ensure the safety of your commercial building while staying on top of critical information. With one simple installation, the Delta T can spare you not only precious downtime but also expensive repairs.
Go beyond preventive maintenance with the Delta T Alert, the sensor that’s revolutionizing electrical systems monitoring. To find out more, click here--or contact us at 1-877-321-0576
A Finger on the Pulse
Preventive Maintenance for Electrical Systems—Every Day
In the highly-competitive world of commercial building management, your success depends on high tenant occupancy, controllable expenses, and trouble-free operation. That means no unexpected shutdowns, no major equipment or service failures, and no expensive emergency repairs.
The heartbeat of any commercial building is its electrical distribution system, which regulates water pressure, climate, communication, and lighting. Without this heartbeat, all services stop--along with your business.
And facility downtime is not an option if you want to keep your tenants.
According to Hartford Steam Boiler Inspection and Insurance Company (HSB), (www.hsb.com), electrical system malfunctions are the leading cause of commercial building fires. These fires have increased in frequency and severity over the past two decades, due primarily to increased demand on existing electrical systems. Even newer buildings are not immune to electrical failures, as businesses demand an ever-increasing stream of power, placing more and more pressure on overloaded systems.
The number one cause of such failures is a lack of proper maintenance—or no maintenance at all. HSB reports that 75% of all electrical failures are due to human error or carelessness, deficient or delayed maintenance, unqualified personnel, and/or budget cuts. According to the Institute of Electrical and Electronics Engineers (IEEE) in New Jersey (www.IEEE.org), the failure rate of electrical systems is three times higher for those that have not had preventive maintenance than for those that have.
Commercial facilities’ infrastructures typically have many safeguards in place, such as pump gauges, water tank level alarms, and smoke detectors. In many cases, a property may have a Building Management System (BMS), which controls and monitors the building’s mechanical equipment, such as air handling and cooling plant systems, as well as lighting, fire extinguishing, and security systems.
Electrical distribution systems, however, are often overlooked because most of the facility’s electrical enclosures are inaccessible. Since many electrical enclosures cannot and should not be opened in the “on” or “energized” position, maintenance personnel usually enter an electrical switchgear room or electrical closet limited to their senses—sound, sight and smell--to detect signs of overheating. But once a worker smells something burning or hears something arcing, significant damage has already occurred, and the level of danger has increased significantly.
In the highly-competitive world of commercial building management, your success depends on high tenant occupancy, controllable expenses, and trouble-free operation. That means no unexpected shutdowns, no major equipment or service failures, and no expensive emergency repairs.
The heartbeat of any commercial building is its electrical distribution system, which regulates water pressure, climate, communication, and lighting. Without this heartbeat, all services stop--along with your business.
And facility downtime is not an option if you want to keep your tenants.
According to Hartford Steam Boiler Inspection and Insurance Company (HSB), (www.hsb.com), electrical system malfunctions are the leading cause of commercial building fires. These fires have increased in frequency and severity over the past two decades, due primarily to increased demand on existing electrical systems. Even newer buildings are not immune to electrical failures, as businesses demand an ever-increasing stream of power, placing more and more pressure on overloaded systems.
The number one cause of such failures is a lack of proper maintenance—or no maintenance at all. HSB reports that 75% of all electrical failures are due to human error or carelessness, deficient or delayed maintenance, unqualified personnel, and/or budget cuts. According to the Institute of Electrical and Electronics Engineers (IEEE) in New Jersey (www.IEEE.org), the failure rate of electrical systems is three times higher for those that have not had preventive maintenance than for those that have.
Commercial facilities’ infrastructures typically have many safeguards in place, such as pump gauges, water tank level alarms, and smoke detectors. In many cases, a property may have a Building Management System (BMS), which controls and monitors the building’s mechanical equipment, such as air handling and cooling plant systems, as well as lighting, fire extinguishing, and security systems.
Electrical distribution systems, however, are often overlooked because most of the facility’s electrical enclosures are inaccessible. Since many electrical enclosures cannot and should not be opened in the “on” or “energized” position, maintenance personnel usually enter an electrical switchgear room or electrical closet limited to their senses—sound, sight and smell--to detect signs of overheating. But once a worker smells something burning or hears something arcing, significant damage has already occurred, and the level of danger has increased significantly.
So Many Points—So Little Time
In a typical one-million square foot high-rise commercial office building, there are literally hundreds of electrical power and distribution panels, along with just as many disconnects. This equipment may receive an infrared scan once per year, at most, or an occasional “clean and tighten,” which is conducted during off hours. The “clean and tighten” procedure requires both an electrical shutdown and significantly higher electricians’ wages (time and a half or double time). It is a major expense and inconvenience for both building owners and their tenants.
Meanwhile, some experts do not recommend routine tightening of electrical connections. In many cases, over-tightening can deform the bolts and/or the contact faces, decreasing the surface contact area and producing greater resistance. Greater resistance can cause heat buildup, potentially damaging insulation and components.
Meanwhile, some experts do not recommend routine tightening of electrical connections. In many cases, over-tightening can deform the bolts and/or the contact faces, decreasing the surface contact area and producing greater resistance. Greater resistance can cause heat buildup, potentially damaging insulation and components.
A Safe, Reliable Solution
You can avoid a major electrical breakdown—and significant financial loss—with the “Delta T Alert”. Developed by Delta T Engineering, LLC, this patented device magnetically attaches to your electrical equipment covers, monitoring the Delta T (temperature differential) between the interior of an electrical enclosure and the ambient temperature of the room that enclosure is in.
You can adjust the Delta T to collect data on a daily basis, at chosen time intervals. The information is then transmitted wirelessly to an onsite computer for analysis. Whether the normal temperature of the room your panels are in is 20° or 100°, the Delta T Alert can warn you of excessive temperature rise within your electrical enclosures before more serious problems may occur. Contact Delta T today to learn more.
You can adjust the Delta T to collect data on a daily basis, at chosen time intervals. The information is then transmitted wirelessly to an onsite computer for analysis. Whether the normal temperature of the room your panels are in is 20° or 100°, the Delta T Alert can warn you of excessive temperature rise within your electrical enclosures before more serious problems may occur. Contact Delta T today to learn more.
Committed to the advancement of nondestructive testing technologies for electrical inspection, all Delta T Engineering personnel are either active members of, or receive annual training from, the following organizations:
